Polyvinyl chloride Density 1380 kg/m3 Young's modulus (E) 2900-3400 MPa Tensile strength(σt) 50-80 MPa Elongation @ break 20-40% Notch test 2-5 kJ/m2 Glass temperature 87 °C Melting point 212 °C Vicat B1 85 °C Heat Transfer Coefficient (λ) 0.16 W/m.K Linear Expansion Coefficient (α) 8 10-5 /K Specific heat (c) 0.9 kJ/(kg·K) Water absorption (ASTM) 0.04-0.4 Price 0.5-1.25 €/kg 1 Deformation temperature at 10 kN needle load source: [1] Polyvinyl chloride Polyvinyl chloride, (IUPAC Polychloroethene) commonly abbreviated PVC, is a widely-used plastic. In terms of revenue generated, it is one of the most valuable products of the chemical industry. Globally, over 50% of PVC manufactured is used in construction. As a building material, PVC is cheap and easy to assemble. In recent years, PVC has been replacing traditional building materials such as wood, concrete and clay in many areas. Despite appearing to be an ideal building material, concerns have been raised about the costs of PVC to the natural environment and human health. There are many uses for PVC. As a hard plastic, it is used as vinyl siding, magnetic stripe cards, window profiles, gramophone records (which is the source of the name for vinyl records), pipe, plumbing and conduit fixtures. It can be made softer and more flexible by the addition of plasticizers, the most widely used being phthalates. In this form, it is used in clothing and upholstery, and to make flexible hoses and tubing, flooring, roofing membranes, and electrical cable insulation. The material is often used for pipelines in the water and sewer industries because of its inexpensive nature and flexibility. Contents 1 Preparation 2 History 3 Applications 3.1 Electric wires 3.2 Pipes 3.3 Unplasticized polyvinyl chloride (uPVC) 4 Health and safety 4.1 Phthalate plasticizers 4.2 Vinyl chloride monomer 4.3 Dioxins 5 Resin identification code 6 References 7 Films 8 See also 9 External links Preparation Polyvinyl chloride is produced by polymerization of the monomer vinyl chloride, as shown. History Polyvinyl chloride was accidentally discovered on at least two different occasions in the 19th century, first in 1835 by Henri Victor Regnault and in 1872 by Eugen Baumann. On both occasions, the polymer appeared as a white solid inside flasks of vinyl chloride that had been left exposed to sunlight. In the early 20th century, the Russian chemist Ivan Ostromislensky and Fritz Klatte of the German chemical company Griesheim-Elektron both attempted to use PVC in commercial products, but difficulties in processing the rigid, sometimes brittle polymer blocked their efforts. In 1926, Waldo Semon of B.F. Goodrich developed a method to plasticize PVC by blending it with various additives. The result was a more flexible and more easily processed material that soon achieved widespread commercial use. Applications Electric wires PVC is commonly used as for the insulation on electric wires; the plastic used for this purpose needs to be plasticized. In a fire, PVC-coated wires can form HCl fumes; the chlorine serves to scavenge free radicals and is the source of the material's fire retardance. However, these (intentional) fumes can also pose a health hazard in their own right. Frequently in applications where smoke is a major hazard (notably in tunnels) PVC-free LSOH (low smoke, zero halogen) cable insulation is used. Pipes Polyvinylchloride is also widely used for producing pipes. About 90% of all PVC pipes are used for drainage and for protecting/containing cables in buildings. Unplasticized polyvinyl chloride (uPVC) Modern "Tudorbethan" house with uPVC gutters and downpipes, fascia, decorative imitation "half-timbering", windows and doors. uPVC is often used in the building industry as a low maintenance material, particularly in the UK, and in the USA where it is known as vinyl.[2][3]. The material comes in a range of colours and finishes, including a photo-effect wood finish, and is used as a substitute for painted wood, most obviously for window frames and sills when installing double glazing in new buildings or to replace older single glazed windows. It has many other uses including fascia, and siding or weatherboarding. The same material has almost entirely replaced the use of cast iron for plumbing and drainage, being used for waste pipes, drainpipes, gutters and downpipes,[4] Due to environmental concerns[5] use of PVC is discouraged by some local authorities[6] and in countries such as Germany and The Netherlands. Health and safety This section does not cite its references or sources. You can help Wikipedia by introducing appropriate citations. Phthalate plasticizers Many Vinyl products contain additional chemicals to change the chemical consistency of the product. Some of these additional chemicals called additives can leach out of vinyl products. Plasticizers which must be added to make PVC flexible have been an additive of particular concern. Because soft PVC toys have been made for babies for years, there are concerns that these additives leach out of soft toys into the mouths of the children chewing on them. Vinyl IV bags used in neo-natal intensive care units have also been shown to leach DEHP (Bis(2-ethylhexyl) phthalate), a phthalate additive. In January 2006, the European Union placed a ban on six types of phthalate softeners in toys (See directive 2005/84/EC). In 2003, the US Consumer Product Safety Commission (CPSC) denied a petition for a similar ban in the United States[1]; however, in the USA most companies have voluntarily stopped manufacturing PVC toys for this age group or have eliminated the phthalates. In a draft guidance paper published in September 2002, the US FDA recognizes that many medical devices with PVC containing DEHP are not used in ways that result in significant human exposure to the chemical[2]. However, FDA is suggesting that manufacturers consider eliminating the use of DEHP in certain devices that can result in high aggregate exposures for sensitive patient populations such as neonates. However, alternative softeners have not been properly tested to determine whether they are more or less safe. Other vinyl products, including car interiors, shower curtains, flooring, etc., initially release chemical gases into the air. Some studies indicate that this outgassing of additives may contribute to health complications, but this information is preliminary and further study is needed. PVC comes under many terms as Petro Vinyl Common (another scientific name) According to some medical studies, the plasticizers added to PVC may cause chronic conditions such as scleroderma, cholangiocarcinoma, angiosarcoma, brain cancer, and acrosteolysis. PVC has been used in many products for many years and still there is not proof of significant harmful effects from exposure. There have been studies, some cited in this article, that indicate "links" with certain medical problems and exposure to PVC products. These links deserve additional study. In 2004, a joint Swedish-Danish research team found a very strong link between allergies in children and the phthalates DEHP and BBzP, commonly used in PVC[7]. Alternative plasticisers are being developed but in many cases these alternatives remain significantly more expensive and their technical performance varies. It is also worth noting that some, though not all, of the alternatives pose significant health risks. One hospital network called the Catholic Healthcare West network, the 8th largest hospital network in the country, recently signed a contract with B.Braun for Vinyl free Intravenous(IV) bags and tubing. Vinyl chloride monomer In the late 1960s, Dr. John Creech and Dr. Maurice Johnson were the first to clearly link and recognize the carcinogenicity of vinyl chloride monomer to humans when workers in the polyvinyl chloride polymerization section of a B.F. Goodrich plant near Louisville, Kentucky, were diagnosed with liver angiosarcoma, a rare disease.[8] Since that time, studies of PVC workers in Australia, Italy, Germany, and the UK have all associated certain types of occupational cancers with exposure to vinyl chloride. The link between angiosarcoma of the liver and long-term exposure to vinyl chloride is the only one which has been confirmed by the International Agency for Research on Cancer. All the cases of angiosarcoma developed from exposure to vinyl chloride monomer, were in workers who were exposed to very high VCM levels, routinely, for many years. According to the EPA, "vinyl chloride emissions from polyvinyl chloride (PVC), ethylene dichloride (EDC), and vinyl chloride monomer (VCM) plants cause or contribute to air pollution that may reasonably be anticipated to result in an increase in mortality or an increase in serious irreversible, or incapacitating reversible illness. Vinyl chloride is a known human carcinogen which causes a rare cancer of the liver."[9] A front-page series in the Houston Chronicle claimed the vinyl industry has manipulated vinyl chloride studies to avoid liability for worker exposure and to hide extensive and severe chemical spills into local communities.[10] Dioxins The environmentalist group Greenpeace has advocated the global phase-out of PVC because they claim dioxin is produced as a byproduct of vinyl chloride manufacture and from incineration of waste PVC in domestic garbage. The European Industry, however, asserts that it has improved production processes to minimize dioxin emissions. Dioxins are a global health threat because they persist in the environment and can travel long distances. At very low levels, near those to which the general population is exposed, dioxins have been linked to immune system suppression, reproductive disorders, a variety of cancers, and endometriosis. According to a 1994 report by the British firm, ICI Chemicals & Polymers Ltd., "It has been known since the publication of a paper in 1989 that these oxychlorination reactions [used to make vinyl chloride and some chlorinated solvents] generate polychlorinated dibenzodioxins (PCDDs) and dibenzofurans (PCDFs). The reactions include all of the ingredients and conditions necessary to form PCDD/PCDFs.... It is difficult to see how any of these conditions could be modified so as to prevent PCDD/PCDF formation without seriously impairing the reaction for which the process is designed." In other words, dioxins are an unavoidable consequence of making PVC. Dioxins created by vinyl chloride production are released by on-site incinerators, flares, boilers, wastewater treatment systems and even in trace quantities in vinyl resins.[11] The US EPA estimate of dioxin releases from the PVC industry (based on industry estimates) more than doubled between 1995 and 2000.[12] The largest well-quantified source of dioxin in the US EPA inventory of dioxin sources is barrel burning of household waste.[13] Studies of household waste burning indicate consistent increases in dioxin generation with increasing PVC concentrations.[14] According to the EPA dioxin inventory, landfill fires are likely to represent an even larger source of dioxin to the environment. A survey of international studies consistently identifies high dioxin concentrations in areas affected by open waste burning and a study that looked at the homologue pattern found the sample with the highest dioxin concentration was “typical for the pyrolysis of PVC”. Other EU studies indicate that PVC likely “accounts for the overwhelming majority of chlorine that is available for dioxin formation during landfill fires.”[15] The next largest sources of dioxin in the EPA inventory are medical and municipal waste incinerators. Studies have shown a clear correlation between dioxin formation and chloride content and indicate that PVC is a significant contributor to the formation of both dioxin and PCB in incinerators.[16] Resin identification code See also: Resin identification code The symbol for polyvinyl chloride developed by the Society of the Plastics Industry so that items can be labelled for easy recycling is: The Unicode character for PVC is U+2765 (HTML ♵). PVC is not typically recycled due to the prohibitive cost of regrinding and recompounding the resin compared to the cost of virgin (unrecycled) resin.citation needed] References ^ A.K. vam der Vegt & L.E. Govaert, Polymeren, van keten tot kunstof, ISBN 90-407-2388-5 ^ uPVC Windows, Doors ^ Vinyl (Poly Vinyl Chloride) in Construction ^ Fascia, Guttering, Fascias, PVCu Soffits, Roofing, Cladding ^ PVC Products - Greenpeace international ^ Environmentally conscious buildings ^ Bornehag et al. (2004). "The Association Between Asthma and Allergic Symptoms in Children and Phthalates in House Dust: A Nested Case-Control Study". Environmental Health Perspectives 112 (14): 1393-1397. ^ Creech and Johnson (Mar 1974). "Angiosarcoma of liver in the manufacture of polyvinyl chloride.". Journal of occupational medicine. : official publication of the Industrial Medical Association. 16 (3): 150-1. ^ National Emission Standards for Hazardous Air Pollutants (NESHAP) for Vinyl Chloride Subpart F, OMB Control Number 2060-0071, EPA ICR Number 0186.09 (Federal Register: September 25, 2001 (Volume 66, Number 186)) ^ Jim Morris, "In Strictest Confidence . The chemical industry's secrets," Houston Chronicle. Part One: "Toxic Secrecy," June 28, 1998, pgs. 1A, 24A-27A; Part Two: "High-Level Crime," June 29, 1998, pgs. 1,A, 8A, 9A; and Part Three: "Bane on the Bayou," July 26, 1998, pgs. 1A, 16A.] ^ Pat Costner etal, "PVC: A Primary Contributor to the U.S. Dioxin Burden; Comments submitted to the U.S. EPA Dioxin Reassessment," (Washington, D.C. Greenpeace U.S.A., February 1995 ^ US EPA, The Inventory of Sources and Environmental Releases of Dioxin-Like Compounds in the United States: The Year 2000 Update, March 2005 ^ US EPA2005 ^ Costner, Pat, (2005), ” Estimating Releases and Prioritizing Sources in the Context of the Stockholm Convention”, International POPs Elimination Network, Mexico. ^ Costner 2005 ^ Katami, Takeo, et al (2002) “Formation of PCDDs, PCDFs, and Coplanar PCBs from Polyvinyl Chloride during Combustion in an Incinerator” Environ. Sci. Technol., 36, 1320-1324. and Wagner, J., Green, A. 1993. Correlation of chlorinated organic compound emissions from incineration with chlorinated organic input. Chemosphere 26 (11): 2039-2054. and Thornton, Joe (2002) “Environmental Impacts of polyvinyl Chloride Building Materials, Healthy Building Network, Washington, DC. Films Blue Vinyl (2002). Directed by Daniel B. Gold and Judith Helfand. See also List of cancer clusters Chlorinated polyvinyl chloride External links Vinyl 2010 is putting into practice the commitment of the European PVC industry to Sustainable Development. PVC and Design PVC for Pipes The European PVC Portal (European Council of Vinyl Manufacturers) PVC - the Poison Plastic - Hazards and Safer Alternatives Polyvinyl Chloride - Poisonous Plastic Health impacts of PVC and guides to alternatives - Healthy Building Network PVC Information The Vinyl Institute Vinyl.org (Vinyl Council of Canada) Uni-Bell PVC Pipe Association The Association between Asthma and Allergic Symptoms in Children and Phthalates in House Dust: A Nested Case-Control Study European Council of Plasticisers and Intermediates Blue Vinyl Documentary Homepage link to a site by the first person documentary filmmaker that explores some of the questions about the sustainability of PVC An introduction to vinyl Link page to external chemical sources. v·d·e Plastics Polyethylene (PE) Polypropylene (PP) Polystyrene (PS) Polyethylene terephthalate (PETE) Polyamide (PA) Polyester Polyvinyl chloride (PVC) Polycarbonate (PC) Acrylonitrile butadiene styrene (ABS) Polyvinylidene chloride (PVDC) Polytetrafluoroethylene (PTFE) Polymethyl methacrylate (PMMA) Polylactic acid (PLA) Search Term: "Polyvinyl_chloride" Categories: Articles lacking sources | Articles with unsourced statements | Plastics | Vinyl polymers | Dielectrics

Here's our top rated pvc pipe links for the day:

Pipe-bomb scare forces cancellation of mass 

Thank you for reading the pvc pipe page - pvc pipe. 

1. pvcpipe
2. pbc pipe