For the album, see Sound Affects. Sound effects or audio effects are artificially created or enhanced sounds, or sound processes used to emphasize artistic or other content of movies, video games, music, or other media. In motion picture and television production, a sound effect is a sound recorded and presented to make a specific storytelling or creative point without the use of dialogue or music. The term often refers to a process applied to a recording, without necessarily referring to the recording itself. In professional motion picture and television production, the segregations between dialogue, music, and sound effects recordings are quite severe, and it is important to understand that in such contexts dialogue and music recordings are never referred to as sound effects, though the processes applied to them, such as reverberation or flanging, often are. Contents 1 History 2 In film 3 In video games 4 Recording effects 5 Processing effects 6 Aesthetics in film 7 Techniques 8 See also 9 External links History The use of sound effects originated in theater; by some accounts sound effects were already in use in Classical Antiquity. Various devices were used to simulate such sounds as thunder or approaching horse hooves off stage. The repertory of early theatrical sound effects became more elaborate in the early modern era, and various mechanical devices were constructed to produce more and better sounds. Large urban theaters often had large collections of such devices. Samples of such vintage sound effects can occasionally be heard in early audio recordings of Vaudeville acts, although by contemporary accounts the effects in the primitive early recording studios were less elaborate than those in theaters. The field of sound effects advanced considerably in the 1920s, first with the impetus of radio. Most early radio was live, and featured many live theatrical productions which made much use of sound effects. The better radio studios often employed several sound effects men working at the same time on productions. In the mid 1920s, the advances in recording technology with improved electronic microphones allowed for the practice of having pre-recorded repertories of sound effects on 78 rpm records. Actual recordings of motorcars, airplanes, large crowds laughing or shouting, etc. could then be added to radio dramas via the discs. In the late 1920s motion picture studios switched from silent film to sound, opening up another venue for sound effects. In film In the context of motion pictures and television, sound effects refers to an entire hierarchy of sound elements, whose production encompass many different disciplines, including: Hard sound effects are common sounds that appear on screen, such as door slams, weapons firing, and cars driving by. Background (or BG) sound effects are sounds that do not explicitly synchronize with the picture, but indicate setting to the audience, such as forest sounds, the buzzing of fluorescent lights, and car interiors. The sound of people talking in the background is also considered a "BG," but only if the speaker is unintelligible and the language is unrecognizable (this is known as walla). These background noises are also called ambience or atmos ("atmosphere"). Foley sound effects are sounds that synchronize on screen, and require the expertise of a foley artist to properly record. Footsteps, the movement of hand props, and the rustling of cloth are common foley units. Design sound effects are sounds that do not normally occur in nature, or are impossible to record in nature. These sounds are used to suggest futuristic technology, or are used in a musical fashion to create an emotional mood. Each of these sound "food groups" are specialized, with sound editors known as specialists in an area of sound effects (e.g. a "Car cutter" or "Guns cutter"). The process of creating sound effects can be separated into two steps: the recording of the effects, and the processing. Large libraries of commercial sound effects are available to content producers (such as the famous Wilhelm scream), but on large projects sound effects may be custom-recorded for the purpose. Also, if the soundtrack is processed through a foley, it can make the smallest sound look perfect on screen and the audience can never guess how much work went into the making of that specific sound. In video games The principles involved with modern video game sound effects (since the introduction of sample playback) are essentially the same as those of motion pictures. Typically a game project requires two jobs to be completed: sounds must be recorded or selected from a library and a sound engine must be programmed so that those sounds can be incorporated into the game's interactive environment. Historically the simplicity of game environments reduced the required number of sounds needed, and thus only one or two people were directly responsible for the sound recording and design. As the video game business has grown and computer sound reproduction quality has increased, however, the team of sound designers dedicated to game projects has likewise grown and the demands placed on them may now approach those of mid-budget motion pictures. Many games, such as Half-Life include built-in realtime sound effects, so that, for example, a gunshot in a chamber echoes realistically. Recording effects The best sound effects originate from original sources; the best sounds of machine-gun fire are original recordings of actual machine guns, as opposed to a synthesized or sampled and sequenced effect of a machine gun. When the producer or content creator demands high-fidelity sound effects, the sound editor usually must augment his available library with new sound effects recorded in the field. When the required sound effect is of a small subject, such as scissors cutting, cloth ripping, or footsteps, the sound effect is best recorded in a studio, under controlled conditions. Such small sounds are often delegated to a foley artist and foley editor. Many sound effects cannot be recorded in a studio, such as explosions, gunfire, and automobile or aircraft maneuvers. These effects must be recorded by a sound effects editor or a professional sound effects recordist. When such "big" sounds are required, the recordist will begin contacting professionals or technicians in the same way a producer may arrange a crew; if the recordist needs an explosion, he may contact a demolition company to see if any buildings are scheduled to be destroyed with explosives in the near future. If the recordist requires a volley of cannon fire, he may contact historical re-enactors or gun enthusiasts. People are often excited to participate in something that will be used in a motion picture, and love to help. Depending on the effect, recordists may use several DAT, hard disk, or Nagra recorders and a large number of microphones. During a cannon- and musket-fire recording session for the 2003 film The Alamo, conducted by Jon Johnson and Charles Maynes, two to three DAT machines were used. One machine was stationed near the cannon itself, so it could record the actual firing. Another was stationed several hundred yards away, below the trajectory of the ball, to record the sound of the cannonball passing by. When the crew recorded musket-fire, a set of microphones were arrayed close to the target (in this case a swine carcass) to record the musket-ball impacts. A counter-example is the common technique for recording an automobile. For recording "Onboard" car sounds (which include the car interiors), a three-microphone technique is common. Two microphones record the engine directly: one is taped to the underside of the hood, near the engine block. The second microphone is covered in a wind screen and tightly attached to the rear bumper, within an inch or so of the tail pipe. The third microphone, which is often a stereo microphone, is stationed inside the car to get the car interior. Having all of these tracks at once gives a sound designer or mixer a great deal of control over how he wants the car to sound. In order to make the car more ominous or low, he can mix in more of the tailpipe recording; if he wants the car to sound like it is running full throttle, he can mix in more of the engine recording and reduce the interior perspective. In cartoons, a pencil being dragged down a washboard may be used to simulate the sound of a sputtering engine. The first recorded sound effect was of Big Ben striking 10:30, 10:45, and 11:00. It was recorded on a brown wax cylinder by technicians at Edison House in London. It was recorded July 16, 1890 . This recording is currently in the public domain. Processing effects As the car example demonstrates, the ability to make multiple simultaneous recordings of the same subject—through the use of several DAT or multitrack recorders—has made sound recording into a sophisticated craft. The sound effect can be shaped by the sound editor or sound designer, not just for realism, but for emotional effect. Once the sound effects are recorded or captured, they are usually loaded into a computer integrated with an audio non-linear editing system. This allows a sound editor or sound designer to heavily manipulate a sound to meet his needs. The most common sound design tool is the use of layering to create a new, interesting sound out of two or three old, average sounds. For example, the sound of a bullet impact into a pig carcass may be mixed with the sound of a melon being gouged to add to the "stickiness" or "gore" of the effect. If the effect is featured in a close-up, the designer may also add an "impact sweetener" from his library. The sweetener may simply be the sound of a hammer pounding hardwood, equalized so that only the low-end can be heard. The low end gives the three sounds together added weight, so that the audience actually "feels" the weight of the bullet hit the victim. If the victim is the bad guy, and his death is climactic, the sound designer may add reverb to the impact, in order to enhance the dramatic beat. And then, as the victim falls over in slow motion, the sound editor may add the sound of a broom whooshing by a microphone, pitch-shifted down and time-expanded to further emphasize the death. If the movie is a science-fiction film, the designer may phaser the whoosh to give it a more sci-fi feel. (For a list of many sound effects processes available to a sound designer, see the bottom of this article.) Aesthetics in film When creating sound effects for films, sound recordists and editors do not generally concern themselves with the verisimilitude or accuracy of the sounds they present. The sound of a bullet entering a person from a close distance may sound nothing like the sound designed in the above example, but since very few people are aware of how such a thing actually sounds, the job of designing the effect is mainly an issue of creating a conjectural sound which feeds the audience's expectations while still suspending disbelief. In the previous example, the phased 'whoosh' of the victim's fall has no analogue in real life experience, but it is emotionally immediate. If a sound editor uses such sounds in the context of emotional climax or a character's subjective experience, they can add to the drama of a situation in a way visuals simply cannot. If a visual effects artist were to do something similar to the 'whooshing fall' example, it would probably look ridiculous or at least excessively melodramatic. The "Conjectural Sound" principle applies even to happenstance sounds, such as tires squealing, doorknobs turning or people walking. If the sound editor wants to communicate that a driver is in a hurry to leave, he will cut the sound of tires squealing when the car accelerates from a stop; even if the car is on a dirt road, the effect will work if the audience is dramatically engaged. If a character is afraid of someone on the other side of a door, the turning of the doorknob can take a second or more, and the mechanism of the knob can possess dozens of clicking parts. A skillful Foley artist can make someone walking calmly across the screen seem terrified simply by giving the actor a different gait. Techniques In music and film/television production, typical effects used in recording and amplified performances are: echo - one or several delayed signals are added to the original signal. To be perceived as echo, the delay has to be of order 50 milliseconds or above. Short of actually playing a sound in the desired environment, the effect of echo can be implemented using either digital or analog methods. Analog echo effects are implemented using tape delays and/or spring reverbs. When large numbers of delayed signals are mixed over several seconds, the resulting sound has the effect of being presented in a large room, and it is more commonly called reverberation or reverb for short. flanger - a delayed signal is added to the original signal with a continuously-variable delay (usually smaller than 10 ms). This effect is now done electronically using DSP, but originally the effect was created by playing the same recording on two synchronized tape players, and then mixing the signals together. As long as the machines were synchronized, the mix would sound more-or-less normal, but if the operator placed his finger on the flange of one of the players (hence "flanger"), that machine would slow down and its signal would fall out-of-phase with its partner, producing a phasing effect. Once the operator took his finger off, the player would speed up until its tachometer was back in phase with the master, and as this happened, the phasing effect would appear to slide up the frequency spectrum. This phasing up-and-down the register can be performed rhythmically. phaser - the signal is split, a portion is filtered with an all-pass filter to produce a phase-shift, and then the unfiltered and filtered signals are mixed. The phaser effect was originally a simpler implementation of the flanger effect since delays were difficult to implement with analog equipment. Phasers are often used to give a "synthesized" or electronic effect to natural sounds, such as human speech. The voice of C-3PO from Star Wars was created by taking the actor's voice and treating it with a phaser. chorus - a delayed signal is added to the original signal with a constant delay. The delay has to be short in order not to be perceived as echo, but above 5 ms to be audible. If the delay is too short, it will destructively interfere with the un-delayed signal and create a flanging effect. Often, the delayed signals will be slightly pitch shifted to more realistically convey the effect of multiple voices. equalization - different frequency bands are attenuated or amplified to produce desired spectral characteristics. Abbreviated EQ. filtering - Equalization is a form of filtering. In the general sense, frequency ranges can be emphasized or attenuated using low-pass, high-pass, band-pass or band-stop filters. Band-pass filtering of voice can simulate the effect of a telephone because telephones use band-pass filters. overdrive effects such as the use of a fuzz box can be used to produce distorted sounds, such as for imitating robotic voices or radiotelephone traffic. The most basic overdrive effect involves clipping the signal when its absolute value exceeds a certain threshold. pitch shift - similar to pitch correction, this effect shifts a signal up or down in pitch. For example, a signal may be shifted an octave up or down. This is usually applied to the entire signal, and not to each note separately. One application of pitch shifting is pitch correction. Here a musical signal is tuned to the correct pitch using digital signal processing techniques. This effect is ubiquitous in karaoke machines and is often used to assist pop singers who sing out of tune. It is also used intentionally for aesthetic effect in such pop songs as Cher's Believe and Madonna's Die Another Day. time stretching - the opposite of pitch shift, that is, the process of changing the speed of an audio signal without affecting its pitch. resonators - emphasize harmonic frequency content on specified frequencies. synthesizer - generate artificially almost any sound by either imitating natural sounds or creating completely new sounds. modulation - to change the frequency or amplitude of a carrier signal in relation to a predefined signal. Ring modulation, also known as amplitude modulation, is an effect made famous by Doctor Who's Daleks and commonly used throughout sci-fi. compression - the reduction of the dynamic range of a sound to avoid unintentional fluctuation in the dynamics. Level compression is not to be confused with audio data compression, where the amount of data is reduced without affecting the amplitude of the sound it represents. 3D audio effects - place sounds outside the stereo basis reverse echo - a swelling effect created by reversing an audio signal and recording echo and/or delay whilst the signal runs in reverse. When played back forward the last echos are heard before the effected sound creating a rush like swell preceding and during playback. Jimmy Page of Led Zeppelin claims to be the inventor of this effect which can be heard in the bridge of Whole Lotta Love. See also Wall of Sound Foley artist Audio signal processing, Digital signal processing Acoustics Ambient music, dub music Effects pedal Effects unit Guitar effects External links Sound Effects Libraries- Free Sound Effects & Professional Licensed Providers The Internet's First Sound Effects Library (1997) How to make your own Foley sound effects DJ Resources on Sound Effects FilmSound.org- "Sound effects carry meaning in more ways than simply by accompanying a visible object or person" The Freesound Project - A collaborative database of Creative Commons licensed sounds. Search Term: "Sound_effect" Categories: Special effects | Sound production | Film techniques | Sound effects

Here's our top rated sound effects links for the day:

The Sound Guy Releases The "Backwards Machine" Audio-Reversing Plug-In 

Thank you for reading the sound effects page - sound effects. 

1. sound effect
2. sound affects
3. soundeffects
4. sound efects
5. soud effects
6. sound effets
7. soundd effects